 |
 |
 |
 |
 |
 |
| CERAMIC LARGE METAL CLAY FIRING POT SQL 101 39.95 |
Durable ceramic body has a wide firing range and resists thermal shock. For the metal clay artist, this is the quality solution for firing PMC Pro Silver Metal Clay, all copper clays, and all bronze clays. 5-5/8" Square x 4-3/4" Tall Holds 10 oz of carbon. |
||
| CERAMIC HALF METAL CLAY FIRING POT SQM102 29.95 |
Durable ceramic body has a wide firing range and resists thermal shock. For the metal clay artist, this is the quality solution for firing PMC Pro Silver Metal Clay, all copper clays, and all bronze clays. 3-1/8" x 5-5/8" x 4-3/4" Tall Holds 5 oz. of carbon. |
||
| CERAMIC QUARTER METAL CLAY FIRING POT SQS103 21.95 |
Same as above. For the metal clay teacher, this is the great solution for class situations. 3-1/8" x 3 -1/8" x 3-3/4" Tall Holds 3 oz. of carbon. |
||
| FIRING VESSEL PICK UP TOOL SQPUT101 13.00 |
Aluminum tool fits in slot of ceramic firing pot for safe pickup (with front loading kilns). | ||
| ADAPT-IT PELLETS TC-7003 11.50 |
Adapt-a-pellet is an advanced modeling compound that melts in hot water and solidifies at room temperature. When warm, it acts like clay, but when it cools it resembles a strong plastic. Unlike other products that once they dry they are locked in that shape forever, Adapt-a-pellet can be reheated over and over again and re-molded into any number of configurations. | ||
| COIL ROLLER 1250 4.00 |
Use this square plastic tool to roll out perfect metal clay and polymer clay coils. | ||
| CRUCIBLES & HOLDERS CH100 26.00 |
Crucible made of fused silica with clay bond, this melting dish is well-suited for melting metals with high melting points. Outside diameter is 3" with 6 oz capacity. Simple thumb screws on the handle secure the melting dish. | ||
| FIRE BRICK FB1 8.00 |
Fire Bricks are a special type of brick that can handle extreme temperatures. | ||
| MO'S MOLDS CDF 100 7.00 |
Dry and fire your Lentil Beads, Curved Pendants and Earrings on Ceramic Bisque Molds. Look inside to find a unique texture. Texture and dry on the same mold. The mold withstands heat up to 1865 degrees. 3 different sizes and 3 different textures are available in each package. |
||
| MO'S MINI NEEDLE TOOL MMNT100 8.00 |
Replace your large needle tool with a fine needle point with polymer clay handle. No more jagged edges. Now cutting through Metal Clay is a breeze. | ||
| ANVIL SQUARE PILLOW ASP101 14.99 |
This 7'' leather anvil pillow is filled with steel shot, making it not only an effective cushion for hammering & chasing, it also deadens the noise and reduces bounce-back. (Hammer & bench block sold separately.) | ||
| BENCH BLOCK BB101 17.95 |
These case-hardened steel blocks 2 1/2" x 2 1/2" are used to support your work for a variety of tasks. Including flattening wire, bending, riveting, and general hammering. All blocks are ground flat and smooth and all edges are sharp. | ||
| STUBBY HAMMER SH130 4.99 |
Ball Peen Hammer, Stubby, Black Handle, These stubby hammers are only 6 in. in overall length so they're the perfect choice when work space is at a minimum. | ||
BRASS BRUSH B1414 8.99 |
Soft Brass is great for cleaning all your metal clay pieces. Each measures approximately 9" (228.6 mm) long. |
||
